CACARS

How to Check Transmission Fluid in a Ml320 Benz

1. Look up your local Mercedes dealership in the phone directory and give their service department a call. Inquire about ordering your own transmission fluid dipstick for the ML320, and be sure to tell them your model year. They should be able to quote you a price and help you arrange the purchase over the phone.
2. Drive the car for about ten miles or 20 minutes. Be sure to take your dipstick and rag along with you for the ride. If possible, spend part of the drive on a high-speed road so that you can cycle through all of your gears during the trip. This is to warm up the engine and transmission, lubricate the entire transmission and bring the transmission fluid up to warm volume levels.
3. Park the car on a flat surface, put it in neutral and apply the parking break. Pull the hood release lever and leave the engine running.
4. Open the hood and prop it up with the support arm.
5. Look just to the right side of the air filter compartment, which is the long black plastic compartment just behind the engine. You should see a small plastic tube with a red plastic cap. This is the transmission fluid dipstick tube.
6. Move the red plastic cap to the side, then carefully feed the dipstick all the way into the tube. When its all the way in, carefully pull it all the way out. Be careful of the tip, which should be covered in transmission fluid.
7. Check the reading on the dipstick. The proper line to read should be clearly marked as WARM FULL.
8. Replace the red cap on the dipstick tube and close the hood.